Resources

589 results

Product Change Notices (PCNs)

PCN02784 Mold Compound Change for 44pin TSOP2 for ASE-KH

Download

Product Change Notices (PCNs)

PCN02370 Everspin is adding ASE-Malaysia as a qualified assembly site

Download

Product Change Notices (PCNs)

PCN02693A Add OSE as a qualified assembly subcontractor

Download

Product Change Notices (PCNs)

PCN02542 Add TICP as a qualified source of the 16Mb X8 in the TSOP2 package

Download

Product Change Notices (PCNs)

PCN02257 Everspin adds UTAC Dongguan (UDG) as a qualified source of the BGA package

Download

Product Change Notices (PCNs)

PCN20120628_0 A - Everspin qualifies ASE Malaysia as an assembly source for 256Kb and 1Mb MRAM in the BGA package

Download

Product Change Notices (PCNs)

Add ASE as a qualified assembly subcontractor for 256Kb and 1Mb MRAM in TSOP2 packages

Download

Product Change Notices (PCNs)

Product Discontinuance of 32-SOIC Package

Download

Product Change Notices (PCNs)

PCN02756 Adding ASE Malaysia as a Qualfied Assembly Site on 16Mb BGA Product_final_C.pdf

Download

Product Change Notices (PCNs)

PCN02941 Moisture Sensitivity Level of the 16Mb MRAM in the 48-BGA Package.pdf

Download

Frequently Asked Questions

PREPROGRAMMING MRAM, REFLOW Can Everspin MRAM be programmed prior to assembly and solder reflow?

Yes. Our partner, Xeltek has developed pre-programming systems for Everspin MRAM. See their site at http://www.xeltek.com/superpro-supports-mram-technology.

PACKAGE, ANNEAL, PLATING Are the Everspin parts Annealed after the lead frame is plated?

Yes. 1 hour anneal @ 150C after lead frame tin plating is standard process for our assemblers.

ECCN, EAR99, EXPORT CONTROL CLASSIFICATION NUMBER What is the Everspin Export Control Classification Number (ECCN)?

The Everspin Export Control Classification Number (ECCN) is EAR99.

CURIE TEMP What is the value of the Curie Temperature Point for Everspin MRAM products?

The Curie temperature for thin films of NiFe that are used in Toggle MRAM are well above 300C. We have verified no loss of data in Everspin Toggle MRAM that has been heated to 250C for several hours.

BOARD ASSEMBLY Are there any special handling requirements for board assembly using MRAM?

There are no special handling requirements for assembly of MRAM.

HANDLING REQUIREMENTS Are there any special handling requirements for shipping and receiving of MRAM?

There are no special handling requirements for shipping or receiving MRAM.

SYSTEM DESIGN TECHNIQUE FOR MRAM What are some system level design techniques that I could implement to reduce the risk of exposure to levels of external magnetic fields that may affect MRAM? Can I place an MRAM near motors or transformers?

Everspin MRAM has an absolute maximum magnetic field specification comparable to a Hard Disk drive. Everspin MRAM can be placed near motors or transformers as long as the magnetic field emanating from these components does not exceed the absolute maximum magnetic field specification at the location of the MRAM.

PART MARKING, DATE CODE Everspin has used 2 types of the marking in the past. Is there any chance to have "FATWLYYWW" type of marking from now on?

We are using the alternative format for all products now with the exception of the 4Mb x8,x16 and 1Mb x16 BGA. There is no plan to change back to the previous marking format.

MOISTURE SENSITIVITY What is the moisture sensitivity level of an MRAM part?

MSL-3 is the standard for all Everspin MRAM products. Some device/package combinations may be rated for less time out of the bag when in the early stages of their release and full MSL-3 qualification has not completed. Please check the device data sheet or contact Everspin to confirm the MSL level for a specific device.

LEADFRAME MATERIAL What is the leadframe material?

Cu Alloy 194. For more details request our Materials Composition Declaration document

ESD What are your standard ESD testing requirements?

Our standard ESD requirements are: Human Body Model: 2kV, Charged Device Model: 500V, Machine: not usually tested.